Skip to main content

Satellites As Part Of the Solution

"When Terrestrial Communicatios Infrastructure is Damaged, Destroyed, or Overloaded, Satellites = Operability"


Satellite communication are :
  • High Survivable (Physical survivability and robustness)
  • Independent of Terrestrial Infrastructure
  • Able to Provide the Load Sharing and Surge Capacity Solution for Larger Sites
  • Best for Redundancy : They add a Layer of Path Diversity and Link Availability

Satellite Systems Perform Effectively When :
  • Terrestrial infrastructure is damaged, destroyed, or overloaded
  • Interconnecting widely distributed networks
  • Providing interoperability between disparate systems and networks
  • Providing broadcasting services over very wide areas such as country, region, or entire hemisphere
  • Providing connectivity for the "last mile" in cases where fiber networks are simply not available
  • Providing mobile/transportable wideband and narrow-band communications
  • Natural disasters or terrorist attacks occur. Satellites are the best and most relliable platform for communications in such situations - fiber networks or even terrestrial wireless can be disrupted by tsunamis, earthquakes, or hurricanes. Satellites are instant infrastructure. 

Benefits Of  Using Satellite :
  • Ubiquitos Coverage : A group of satellites can cover virtually all the Earth's surface
  • Instant Infrastructure : Satellite service can be offered in areas where there is no terrestrial infrastructure and the cost of deploying a fiber or microwave network are prohibitive.It can also support services in areas where existing infrastructure is outdated, insufficient, or damaged.
  • Independent of Terrestrial Infrastructure : Satellite service can provide additional bandwidth to divert traffic from congested areas, provide overflow during peak usage periods, and provide redundancy inthe case of terrestrial network outages.
  • Temporary Network Solutions : For applications such as news gathering, homeland security, or military activities, satellite can often provide the only practical, short-term solution for getting necessary information in and out.
  • Rapid Provisioning of Services : Since satellite solutions can be set up quickly, communications networks and new services can be quickly recovered and reconfigured. In addition, you can expand services electronically without traditional terrestrial networks. As a result, you can achieve a high level of communications rapidly without high budget expenditures.
 

Comments

Popular posts from this blog

Satellite Communication - Part 4 (CPI)

Cross Polar Isolation (CPI) In installation and pointing/peaking antenna, Orthogonal Mode Transducer (OMT) must be set to be as precise as possible to get the best CPI value. above is picture of OMT Feed assembly include with BUC and LNB The minimum value for CPI is 30 dB (better will be good) in Linier Polarized Antennas. The reason is for our receive (Rx)-side as not to get interferenced (distrubed) by other (polarity) Down-Link users, therefore our transmit (Tx) shoild as well not interfere other users that operates at 90 deg (Orthogonal) Polarization. Note : In LH/RH Circular Polarizations, usually CPI of 27dB (=AR of 1.09) is acceptable enough. picture above is careless/miss-aligned OMT setting

Satellite Communication : Transmission Bands

A satellite link is a radio link between a transmitting earth station and receiving earth station through a communications satellite. A satellite link consists of one uplink and one downlink; the satellite electronics (i.e., the transponder) will remap the uplink  frequency to the downlink frequency. The transmission channel of a satellite system is a radio channel using a direct-wave approach, operating in at specific RF bands within the overall electromagnetic spectrum as seen below : The table below shown some key of physical parameters of relevance to satellite communication,  The frequency of operation is in the super high frequency (SHF) range (3-30 GHz). Regulation and practice dictate the frequency of operation, the channel bandwidth, and the bandwidth of the subchannels within the larger channel. Different frequencies are used for the uplink and for the downlink. Frequencies above about 30 MHz can pass through the ionos...

High Throughput Satellite Service - more than modems and transmission

The advent of High Throughput Satellite (HTS) has been significant amount of new satellite capacity come online in recent years, prompting industry-wide disruptive innovation. This lower cost capacity enables a new era of satellite communications, with innovative new applications spreading around the world. However, there are a number of factors that must be considered for the operation of a successful HTS service. The satellite industry is undergoing a dramatic evolution as more and more High Throughput Satellite (HTS) capacity is introduced to markets around the world, like Intelsat Epic , Inmarsat Global Express , Viasat-2 , SES-12 ,etc. HTS is bringing more and lower-cost capacity that enables the satellite industry to cost-effectively provide large-scale internet services to rural and other hard-to-serve areas around the world. To enable these services, many providers are focusing on selecting the optimal ground system, and rightly so, because the ground system is a key e...